Mesh Mist Eliminator
Feature:Mesh mist eliminator is used to gas entrainment fog fog(droplet) remove,recycle expensive droplet (precious materials),or purfication of gas to reduce gas impurties.Mesh mist eliminator is Φ0.15mm-Φ0.25mm corrosion-resistant metal wire or PP,PTFE and other engineering plastics using a special wire woven wire mesh jingwei way,and then pressed into a mesh-type wave(W type) formed after the cross-stack shop.
| wire mesh demister specification |
High efficient type |
shock absorption type |
standard type
Material: 302,304,304 L, 316,316 L, 317
Specifications are as follows:
Model :40-100 60-150 ,140-400
common diameter :0.20-0 .45 mm
form code: SP
Weight capacity: 168 Kg/m3
specific surface area: 529.6 m2/m3
porosity : 0.9788ε |
Material: 302,304,304 L, 316,316 L, 317
Specifications are as follows:
Model : 60-100 80-150 200-400 80-100 90-150
common diameter : 0.12-0.45mm
form code: HR
Weight capacity: 128 Kg/m3
specific surface area: 403.5 m2/m3
porosity : 0.9839ε |
Material: 302,304,304 L, 316,316 L, 317
Specifications are as follows:
Model : 20-40, 30-80, 40-120,50-120
common diameter : 0.21mm
form code: HR
Weight capacity: 168 Kg/m3
specific surface area: 529.6 m2/m3
porosity : 0.9788ε |
Application: mainly used for processing demister for separation of the gas inside the droplets. Can also be extrusion molding, for manufacturing a filtration device.
Packing:in cartons,wooden cases ,on pallet or as your requirements.
